2024 New Holland Construction Compact Track Loaders C337

2024 New Holland Construction Compact Track Loaders C337

Swipe to View More

  • Year 2024
  • Make New Holland Construction
  • Model Compact Track Loaders
2024 New Holland Construction Compact Track Loaders C337

2024 New Holland Construction Compact Track Loaders C337

2024 New Holland Construction Compact Track Loaders C337

300 Series compact track loaders are reliable workhorses that deliver high performance in all conditions. Model C337 builds on the strength, visibility, power and smooth ride you’ve come to expect from New Holland CTLs with the addition of key enhancements that improve durability, operating ease and overall productivity.

Features may include:

POWER THROUGH TOUGH JOBS

  • The reliable hydraulic system of the C337 delivers fast cycle times, raising in just 4.5 seconds and lowering in only 2.6 seconds, in addition to producing less noise and providing extra-smooth operation due to in-line hydraulic pumps. New Holland Tier 4 Final engines deliver powerful performance, use less fuel, are easy to maintain - decreasing operating costs - and still deliver powerful 74 HP (55 kW) performance to the C337.

SMOOTH RIDE, EXTENDED LIFE

  • The low-profile track undercarriage of the C337 that provides 9.6 inches (244 mm) of ground clearance makes cleanout a breeze, reduces noise and increases durability. The loader also yields a smoother ride with 64.5 inches (1639 mm) of track on ground, thanks to steel-embedded tracks rolling on the rubber instead of steel. Fewer moving parts than competitive designs mean less complexity and complications, all adding up to longer track life.

LIFT AND CARRY OPERATIONS

  • The vertical lift linkage delivers up to 37 inches (941 mm) of dump height reach and a maximum dump height of over 100 inches (2581 mm) to precisely place loads in the center of high-sided truck boxes or hoppers. With a full rated operating load of 7,400 lbs (3357 kg), 3,700 lbs (1678 kg) at 50% tip and 2,590 lbs (1178 kg) at 35% tip, the C337 is optimized for lift-and-carry operations, allowing operators to load material with precision and confidence.

8” LCD MULTIFUNCTION DISPLAY MAKES OPERATION EASIER

  • The LCD display with an integrated back-up camera helps you operate a 300 Series loader with greater ease and confidence. At 8 inches in size and mounted conveniently on the right forward post, the LCD display puts all the information and tools for greater productivity right where you need it. The display provides key operation data, including engine and performance information, RPM, fuel level, battery voltage, hydraulic oil temperature, engine temperature, and trip screen. The integrated backup camera increases visibility to the rear of the loader, improving operator efficiency and safety. You can set the camera for “always on” or to engage only when shifting the loader into reverse gear.

  • New Holland 300 Series loaders make comfort a priority to boost productivity on the job. More comfort starts with the cab itself, one of the widest in the industry, so it's easy to enter and exit. Full-covering trim absorbs noise, and the visibility panel on the cab roof gives you a clear view in all directions, even to the raised bucket or attachments. The fully sealed and pressurized cab minimizes dust and exhaust infiltration.

Engine

Engine Management FPT / F5BFL463A*F001
Engine Power Horsepower per SAE J1349 Gross: 55 kW (74 hp) @ 2500 rpm | Horsepower per SAE J1349 Net: 51 kW (68 hp) @ 2500 rpm
Displacement 3.4 L (207.5 in3)
Engine Torque Peak: 314 Nm (232 lb-ft) @ 1400 rpm
Bore 99 mm (3.9 in)
Stroke 110 mm (4.3 in)
Aspiration Air intake: Turbocharged Aftercooled with external EGR

Fuel System

Fuel Injection HPCR Direct

Operational

Operating Speed Travel speed, low range: 8.9 km/h (5.5 mph)
Operating Conditions Breakout Force, lift cylinder: 27.2 kN (6110 lbs) | Breakout force bucket cylinder: 32.7 kN (7360 lbs)

Hydraulics

Ground Pressure (with spec belt): 4.2 PSI
Hydraulic Flow Pump Flow: 91.5 Lpm (24.2 gpm)
Maximum Pressure Relief Pressure: 210 bar (3,046 psi)

Dimensions

Dimensions Bucket hinge pin: 3330 mm (131.1 in) | Top of ROPS: 2043 mm (80.4 in) | Bottom of level bucket, fully raised: 3125 mm (123.0 in) | Dump angle, degrees: 55° | Rollback, bucket on ground, degrees: 33° | Track on ground: 1639 mm (64.5 in) | Angle of departure, degrees: 32° | Clearance circle without bucket: 1482 mm (56.2 in) | Clearance circle rear: 1702 mm (67 in) | Clearance circle with foundry bucket in carry position: 2200 mm with 1981 mm bucket | Clearance circle with low profile bucket on ground: 2297 mm with 1981 mm bucket | Clearance circle with extended low profile on ground: 2409 mm with 1981 mm bucket | Track gauge: 1488 mm (58.6 in)
Overall Length without attachment with coupler: 2972 mm (117.0 in) | Overall length with foundry excavation bucket on ground: 3292 mm (141.1 in) | Overall length with low profile bucket: 3727 mm (146.7 in) | Overall length with low profile extended bucket: 3823 in (150.5 in)
Height Bucket hinge pin: 3330 mm (131.1 in) | Top of ROPS: 2043 mm (80.4 in) | Bottom of level bucket, fully raised: 3125 mm (123.0 in)Dump reach (max height): 941 mm (37 in) @ 45° | Rollback, bucket at full height, degrees: 85° | Dump height with foundry/excavating bucket short lip: 2655 mm (104.5 in) @ 45° | Dump height with low profile/standard lip bucket: 2581 (101.6) @ 45°
Ground Clearance (bottom of belly pan): 244 mm (9.6 in)
Overall Width 76.5 in (1943 mm)
Overall Height Overall operating height with foundry/excavating bucket short lip: 4068 mm (160.2 in) | Overall operating height with low profile/standard lip bucket: 4176 mm (164.4 in) | Overall operating height with low profile extended/long lip bucket: 4298 mm (169.2 in)

Capacities

Load Capacity, Land Rater Operating Load @50% tip: 1678 kg (3700 lbs) | Rater Operating Load @ 35% tip: 1178 kg (2590 lbs) | Tipping Load: 3357 kg (7400 lbs)

Weights

Weight, In Running Order 4520 kg (9945 lbs)
Weight, As Shipped 4370 kg (9615 lbs)

Product Photography