2024 New Holland Construction Loader Backhoes B95D Long Reach

Information

2024 New Holland Construction Loader Backhoes B95D Long Reach

Businesses from agriculture to horticulture, landscaping to drainage and irrigation need multiskilled and cost-effective equipment. The digging and lifting capabilities of a New Holland D Series loader backhoe leave no room for compromising on performance. Built-in versatility, prioritized operator comfort and the advanced Tier 4 Final engine all work to prove how models B95D, B95D Tool Carrier (TC), B95D Long Reach (LR) will be one investment that never comes up short of work.

Features may include:

REACH FOR IT ALL

  • Jobsite domination is at arm's length using the 20 ft 8 in feet (6286 mm) of overall reach on the B95D and TC models. Reaching for the stars? Check out model B95D LR with a standard overall reach of 19 ft 3 in (5853 mm) and 22 ft 4 in (6814 mm) when extended. Tower over the competitors with the standard maximum operating height of nearly 20 ft (6055-6285 mm) on the backhoe and 14 ft 5 in (4400 mm) of maximum loader operating height using the 1.1 cu yd Heavy-Duty General Purpose bucket.

DEFINED BY VERSATILITY

  • The reliable hydraulic system on B95D models delivers fast cycle times in the wink of an eye, raising a 1.3 cy yd Heavy-Duty General Purpose bucket to full height in 3.7 sec, lowering in 2.70 sec and a 1.90 sec dump time. D Series loader backhoe models deliver exceptional performance with just a single attachment, while the front loader can be fitted to meet your needs with a 1.3 cu. yd. standard bucket, a 4x1 or 6x1 bucket. The backhoe can be equipped with a variety of attachments, such as a hydraulic breaker, auger, or thumb; and loader attachments such as a sweeper broom, fork, scrap grapple or claw, to match a wide range of worksite demands.

POWERSHIFT OR POWERSHUTTLE, IT'S YOUR CHOICE

  • D Series loader backhoes come with switchable two- or four-wheel-drive, a powershuttle forward/reverse mechanical transmission, or the automatic PowerShiftTM transmission. All PowerShift models now feature a convenient F-N-R switch on the front loader multifunction lever.

Photos

Highlights

  • Erin, Ontario
  • 2024
  • New Holland Construction
  • Loader Backhoes B95D Long Reach
  • Synchromesh
  • Available
  • Blade: 2250 mm (7'5") | Transport width: 2300 mm (7’ 6”)
  • Transport height: 3815 mm (12’ 6”) |Height to top of cab: 2870 mm ( 9’ 5”) | Max operating height: 18’ 5” (5624 mm) - 18’ 6” (5625 mm) - 20’ 7” (6285 mm) | Max operating height: 4276 14’ 0”) | Height to hinge pin: 3481 mm (11’ 5”) | Dump height: 2784 (9’ 2”) | Loading Height: 12’ 4” (3768 mm) - 12’ 4” (3770 mm) - 14’ 6” (4431 mm) | Max pin height: 16’ 4” (4969 mm) - 15’ 5” (4698 mm) - 17’ 7” (5359 mm) | Loading Reach @ max height: 5’ 4” (1615 mm) - 5’ 2” (1582 mm) - 7’ 10” (2398 mm) | Dig reach @ max height: 7’ 6” (2294 mm) - 7’ 8” (2341 mm) - 10’ 4” (3157 mm)

Specifications

  • 2024
  • New Holland Construction
  • Loader Backhoes
  • B95D Long Reach
  • General
  • F5BFL413B*B003
  • Tier 4 Final certified, Diesel Oxidation Catalyst with Urea Dosing Module and Selective Catalytic Reduction, HPCR, 4-cycle diesel
  • 4
  • 3.4 L (207 cu.in.)
  • gross: 72 kW (97 HP) | net: 71 kW (95 HP) | Peak torque: 338 lb-ft (458 Nm) @ 1400 rpm
  • 2200 rpm
  • 4F / 4R
  • Synchromesh
  • Less brakes, split brakes
  • 160 amps
  • 22.5 mph (36.2 kph) - 22.1 mph (35.5 kph) | Cycle - Raise to full height: 3.70 sec | Cycle - Lower: 2.60 sec
  • Stabilizer spread, operating: 3226 mm (10' 7") | Max grading angle: 116 degrees | Max. bucket rotation: 204 degrees | Bucket Rollback At ground level: 39˚ | Bucket Rollback Raised: 45˚ | Stabilizer spread, operating: 3226 mm (10’ 7”) | Stabilizer spread, leveling angle: 14˚ | Max dump angle: 45˚ | Reach @ 45 degree dump angle: 725 mm (2’ 5”) | 2WD curb clearance: 13’ 6” - 12’ 7” | 4WD curb clearance: 15’ 9” - 11’ 5” | 2WD bucket clearance: 17’ 9” - 16’ 8” | 4WD bucket clearance: 19’ 5” - 16’ 6” | Reach from swing post: 17’ 11” (5450 mm) - 17’ 11” (5456 mm) - 21’ 0” (6409mm) | Reach (overall): 19’ 3” (5853 mm) - 19’ 3” (5859 mm) - 22’ 4” (6814 mm) | Dipper lift @ +10 ft (+3 m): 6,275 lbs (2845 kg) - 5,995 lbs (2720 kg) - 4,080 lbs (1850 kg)
  • Blade: 2250 mm (7'5") | Transport width: 2300 mm (7’ 6”)
  • 2250 mm (88 in)
  • Transport height: 3815 mm (12’ 6”) |Height to top of cab: 2870 mm ( 9’ 5”) | Max operating height: 18’ 5” (5624 mm) - 18’ 6” (5625 mm) - 20’ 7” (6285 mm) | Max operating height: 4276 14’ 0”) | Height to hinge pin: 3481 mm (11’ 5”) | Dump height: 2784 (9’ 2”) | Loading Height: 12’ 4” (3768 mm) - 12’ 4” (3770 mm) - 14’ 6” (4431 mm) | Max pin height: 16’ 4” (4969 mm) - 15’ 5” (4698 mm) - 17’ 7” (5359 mm) | Loading Reach @ max height: 5’ 4” (1615 mm) - 5’ 2” (1582 mm) - 7’ 10” (2398 mm) | Dig reach @ max height: 7’ 6” (2294 mm) - 7’ 8” (2341 mm) - 10’ 4” (3157 mm)
  • Transport length: 7030 mm (23’ 0”)
  • Wheelbase 2WD: 2175 mm (85.6") | Wheelbase 4WD: 2175 mm (85.6")
  • 394 mm (15.5”)
  • below grade: 100 mm (4”) | Max dig depth: 15’ 6” (4727 mm) - 15’ 6” (4735 mm) - 18’ 11” (5770 mm) | Dig depth, 2’ flat bottom: 15’ 5” (4695 mm) - 15’ 5” (4703 mm) - 18 ’10” (5735 mm) | Dig depth, 8’ flat bottom: 14’ 4” (4356 mm) - 14’ 4” (4364 mm) - 17’ 11” (5463 mm)
  • 131 L (34.6 gal)
  • 50.7 L (13.4 gal.)
  • DEF system: 13.2 L (3.5 gal) | Bucket digging force: 5883 kg (12,969 lbs) | Boom lift @ -8 ft. (-2.4 m): 3227 lbs (1467 kg), 2732 lbs (1242 kg), 2328 lbs (1058 kg) | Dipper lift @ +10 ft (+3 m): 4070 lbs (1850 kg), 3540 lbs (1609 kg), 2572 lbs (1179 kg) | Bucket breakout force: 6340 daN (12,004 lbf) | | Lift capacity to full height: 3627 kg (7,996 lbs) | SAE heaped capacity,: .88 m3 (1.1 cu yd) | SAE struck capacity: .91 cu yd (.73 m3) | Bucket capacity: .24 m3 | Crowd digging force: 8,520 lbs (3868 kg ) - 8,483 lbs (3848 kg) - 6032 lbs (2736 kg)
  • Base Unit (4WD, Cab): 17,487 lbs | Bucket weight: 309 kg (682 lbs) | Base Unit (4WD, Cab): 18,525 lbs | Base Unit (4WD, Cab): 18,525 lbs