2024 New Holland Construction Compact Wheel Loaders W80C High Speed

Information

2024 New Holland Construction Compact Wheel Loaders W80C High Speed

HIGH PRODUCTIVITY BUILT ON EXPERIENCE

New Holland’s C Series range of compact wheel loaders offer a fresh alternative to the traditional farm, landscape, municipal projects and material handling solutions. In addition to being an asset in other areas in the light construction industry, New Holland's W50C ZB, W50C TC and W80C HS models aid in loading diet-feeders and high-sided trailers.

Features may include:

CLEAN, POWERFUL ENGINES

  • The entire compact wheel loader range boasts 3.4 liter Common Rail F5H engines developed by FPT Industrial that comply with stringent Stage V emissions regulations.
    • PRESS & GO HYDROSTATIC TRANSMISSION

    • All models are equipped with hydrostatic transmissions. Press the accelerator and go, smoothly and without fuss. M

    SUPERIOR COMFORT AND SAFETY

    • An almost unobstructed 360-degree vision is offered by the newly designed cab. The elevated driving position and an abundance of curved glass within four narrow pillars ensure the best view of any materials handler on the market. Access via the wide-opening glass door is easy and straightforward. Operators will appreciate the bright airy space and fully opening side window and low noise levels of 71dB(A). Further comforts include 10 air vents, air conditioning, air suspended seat, tilting and telescopic steering column and many useful storage compartments.

    SETTING NEW STANDARDS OF PERFORMANCE AND PRODUCTIVITY

    • New Holland compact wheel loaders are designed to maximize productivity and minimize the time needed for servicing and attachment changeover. The line-up delivers consistently high levels of performance in every task. Operators enjoy the superior comfort of the cab, maximizing their productivity with minimum fatigue.

    BUILT-IN VERSATILITY

    • Two choices of linkage are available, depending on the end user's preference. Either the Z-bar linkage or the TC linkage can be specified.

Photos

Highlights

  • Erin, Ontario
  • 2024
  • New Holland Construction
  • Compact Wheel Loaders W80C High Speed
  • Hydrostatic transmission
  • Diesel | Replaceable, full flow
  • Available
  • Tread: 59” (1500 mm)
  • Operating height - fully raised with spillguard: 169” (4322 mm) | Hinge pin height - fully raised: 132” (3395 mm) | Dump height - fully raised, 45° dump: 105” (2687 mm)

Specifications

  • 2024
  • New Holland Construction
  • Compact Wheel Loaders
  • W80C High Speed
  • Compact
  • F5HFL463A*F004 | 4-stroke
  • 4 cylinders
  • 3.898 in (99 mm)
  • 4.33 in (110 mm)
  • 3.4 liters
  • Gross hp: 74 hp (55 kW) | Net hp: 70 hp (52 kw)
  • High pressure common rail injection
  • Diesel | Replaceable, full flow
  • Hydrostatic transmission
  • Rated speed, full load: 2500 rpm | Low idle: 950 rpm | High idle, no load: 2500 rpm
  • Angle of departure: 32° | Bucket reach - fully raised, 45° dump: 33” (845 mm) | Bucket reach - 7 ft 0 (2.13m), 45° dump: 52” (1323 mm)
  • Operating height - fully raised with spillguard: 169” (4322 mm) | Hinge pin height - fully raised: 132” (3395 mm) | Dump height - fully raised, 45° dump: 105” (2687 mm)
  • 88” (2225 mm)
  • Under shaft: 19” (493 mm) | under axles: 15” (370 mm)
  • without bucket: 73” (1860 mm)
  • Tread: 59” (1500 mm)
  • bucket level on ground: 222” (5684 mm)
  • Dig: 3” (84 mm)
  • 146” (3721 mm) | Turning angle: From center degrees 40 degrees | Total angle: 80 degrees | Rear axle oscillation, total degrees: 20 degrees
  • 23 gal (87 L)
  • Total: 15 gal (57 l) | Reservoir: 11 gal (40 l)
  • 2 gal (9 L)
  • 3 gal (12 L)
  • 2 gal (7 L)
  • 13,184 lb (5980 kg)