2025 Honda Power Pumps WSP50

Information

2025 Honda Power Pumps WSP50

1/2 hp 115V submersible trash pump

Features may include:

1/2hp, 115V submersible trash pump
  • 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
Solids handling up to 2.0"
  • Move slurry and dirty liquids without the worry of damaging the pump.
Ideal for draining basements, window wells, garden irrigation, decorative fountains and more110 gal./min capacityRated for continuous use
  • Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
Solids handling up to 2.0"
  • Move slurry and dirty liquids without the worry of damaging the pump.
Lightweight, durable stainless steel casing
  • The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
Automatic non-mercury float switch
  • Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
Built in thermal reset switch
  • If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
25 foot heavy duty cordSide discharge
  • Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.
Operates fully or partially submerged
  • No need to worry about the water level for the pump!
Shielded ball bearings for added durability
  • Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
Efficient air-insulated motorOil lubricated double mechanical seals
  • Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.

Photos

Highlights

  • Erin, Ontario
  • 2025
  • Honda Power
  • Pumps WSP50
  • 36 lbs.
  • Available
  • 9.0"
  • 21.5"

Specifications

  • 2025
  • Honda Power
  • Pumps
  • WSP50
  • Water
  • Single Channel Stainless Steel | Seals: Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower
  • HP: 1/2
  • Motor insulation: Class F
  • 115V | Starting amps: 34 | Running amps: 8.3 | Duty: Continuous | Overhead protection: Built-In Thermal Automatic Reset | Cord type: Heavy-Duty 115V
  • Submersible Trash pump
  • 14 psi
  • Pump diameter: 9.0" | Solids handling: 2.0" | Port diameter: 2.0" FNPT | Max. head: 32 ft.
  • Cord: 25 ft.
  • 9.0"
  • 21.5"
  • 110 gpm
  • 36 lbs.
  • Starting Type: Automatic | Casing: Stainless Steel
  • Side
  • Residential: 1 year | Commercial: 1 year